DISPLACER TYPE LEVEL SWITCHES
Displacer type level switch is based on buoyancy principle. It is used for controlling the
liquid level in underground & overhead tanks.
| Application | : | Water, Furnace Oil, Lube Oil Chemical, Solvent, effluent etc. |
|---|---|---|
| Protection | : | Weather proof IP 65/Ex-Proof IIA & IIB |
| Output | : | Relay contacts |
| Switch Rating | : | 5 Amps 230 VAC |
| Pressure | : | 20kg/Cm2 |
| Temp. | : | 1500 C |
| Conn. | : | 3″(Min.) Flanged or Screwed |
| (1) Service | : To Mention |
|---|---|
| (2) Op Press Kg/Cm2g/Temp/S.G | : To Mention |
| (3) All wetted parts malt | : SS/PP/PVC/HDPE/PVDF/PTFE etc. |
| (4) No. of Displacer | : 1, 2, 3 (HIHI, HI, LO & LOLO) |
| (5) MOC OF Spring | : SS 316 / Inconel /Monel /SS sleeved with PTFE |
| (6) MOC Multistrand wire rope | : SS316 /PP/SS sleeved with PTFE |
| (7) Mounting Flange | : 3″ ANSI 150# RF N 16.5 (OR) to Mention |
| (8) Connection Head | : Cast Aluminium Weatherproof of Flameproof |
| (9) Cable Entry | : ¾”ET (F) STD |
| (10) Switch Differential | : 60-80 mm Approx |
| (11) Guide Pipe perforated | : Will be supplied as per the request |
| (12) Repeatability | : ±1% |
| (13) Measuring Range / Tank Height | : To Mention |
| (14) HI & LO actuation Points | : To Mention from bottom of the flange |
| (15) Adjustable | : The switches are adjustable over the entire stem
length to have various level actuation points |